军事模型，静态军事模型有纸模，塑料模型，木帆船模型，金属模型，树脂模型，场景模型。
Military model, Shenzhen static military model includes paper model, plastic model, wooden sailboat model, metal model, resin model and scene model.
动态的主要就是遥控了。
The main dynamic is remote control.
静态中，纸模看起来像小孩玩的，其实是较高境界，因为纸比较脆弱，却能够模仿所有变化效果。
In the static state, the paper mold looks like a child playing, but it is actually a higher state, because the paper is relatively fragile, but it can imitate all the change effects.
木制航海模型其次，考验考证、耐心、雕工、打磨和上色技法。
Secondly, wooden navigation models test the techniques of textual research, patience, carving, polishing and coloring.
塑料模型难度一般，按图施工，效果好与不好的差距在于上色，上色的差距在于分色，渍洗和旧化。不了解用色和做旧的，永远就是在做玩具。
The difficulty of plastic model is general. It is constructed according to the drawing. The difference between good and bad results lies in coloring, and the difference between coloring lies in color separation, pickling and aging. If you don't know how to use color and make old ones, you are always making toys.
军事模型
Military model
动态的遥控成本就太高了，变态者也很多，目前有毛子做了喷气式苏27，我这辈子死也不会玩遥控。只玩玩塑料模型，水线，兵人，木船模型和场景模型。
The cost of dynamic remote control is too high, and there are many perverts. At present, maozi has made jet Su 27. I won't play remote control in my life. Only play with plastic models, waterlines, soldiers, wooden boat models and scene models.
组装塑料模型步骤
To assemble a plastic model
一是清点零件，用泡沫笔标号，然后从板框上剪下来，全部精细修边，用砂纸打磨毛边、连接口、合模线、用补土填注塑孔。
One is to count parts, use foam pen labels, then cut them from the frame, trim all edges carefully, use sandpaper to polish the burrs, connect joints, mold lines, and fill holes with plastic fill.
二是假组合，看下组合度。结合度好的材料，车体，机体，履带等都是可以直接假组的，结合度不好的地可以用遮盖胶带先固定一下，假组的目的是看哪里有缝隙，哪里有凹凸，以便调整。
The second is false combination. Look at the combination degree. Materials with good bonding degree, car body, body, track, etc. can be directly combined. Areas with poor bonding degree can be fixed with masking tape first. The purpose of the false group is to see where there are gaps and bumps for adjustment.
三是按照图纸粘接主要部分。用滴缝胶，一定要避免胶水过多渗出结合面。
Third, the main parts shall be bonded according to the drawings. When using drip joint glue, be sure to avoid too much glue seeping out of the joint surface.
四是上金属改造件。
Fourth, upper metal transformation parts.
五是分部上色，比如坦克履带和车身分开，飞机内部和外部，舰艇分木甲板和金属船身。
The fifth is to color the parts. For example, the tank tracks are separated from the body, the inside and outside of the aircraft, and the ship is divided into wooden deck and metal hull.
军事模型上色基本步骤有：
The basic steps of military model coloring are as follows:
分水补土打底，细喷描黑线暗部，轻粗喷大面积部分，上高光。对于有迷彩的，分硬迷彩和软迷彩，所谓硬迷彩就是色块边缘是实线，这个要用到遮盖纸。所谓软迷彩就是色块边缘是自然过渡的，直接手持喷枪分色。
Divide the water, fill the soil and make the bottom, fine spray the dark part of the black line, light and coarse spray the large part, and highlight it. For those with camouflage, it is divided into hard camouflage and soft camouflage. The so-called hard camouflage is that the edge of the color block is a solid line, which requires covering paper. The so-called soft camouflage is that the edge of the color block is a natural transition, and the color is separated directly with a hand-held spray gun.
六是上帖纸，软化贴纸。
Sixth, apply stickers and soften stickers.
七是整体调整。
Seventh, overall adjustment.
八是旧化，有的人在旧化以前还要做镜像。
Eighth, aging. Some people have to mirror before aging.
军事模型DIY基本旧化方法有：
The basic aging methods of military model DIY include:
1.盐蚀，用来做沙漠涂装风化效果。
1. Salt corrosion, used for desert coating weathering effect.
2.干扫，用来处理棱角掉漆，把手油化。
2. Dry sweeping is used to deal with edges and corners, paint falling off and handle oiling.
3.流锈和油污，用来处理引擎，排烟管，水线船。
3. Rust and oil stain are used to treat engines, smoke exhaust pipes and waterline ships.
4.点描，用来处理弹孔，擦伤，泥土飞溅污渍。
4. Point tracing is used to deal with bullet holes, scratches, soil splashes and stains.
The content of this article is provided to you by a large aerospace model. We focus on customer needs, continuous development and provide more services for customers. For details, please refer to our website http://www.quanyimoxing.com
