大型机器人模型制作清洗是机器人模型美容基础的一个环节，也是机器人模型日常保养中频繁进行的一项工作。机器人模型表清洗包括人工清洗和设备清洗两种，这两种方法都要用相应的清洗剂和清洗设备才能完成。
The production and cleaning of large-scale robot models is a basic part of the beauty of robot models, and is also a frequent work in the daily maintenance of robot models. Robot model table cleaning includes manual cleaning and professional equipment cleaning, both of which can only be completed with corresponding cleaning agents and cleaning equipment.
大型机器人模型清洗用品的选择与使用机器人模型清洗用品主要用于清洗机器人模型表及机器人模型主要部件的污垢，部分产品能对表起到保护作用。
Selection and use of large-scale robot model cleaning supplies robot model cleaning supplies are mainly used to clean the dirt of the robot model table and the main parts of the robot model. Some products can protect the table.
机器人模型清洗用品根据功能不同可分为水性清洗剂、有机清洗剂、油脂清洗剂、溶解清洗剂和多功能清洗剂。有机清洗剂有机清洗剂主要用于去除大机器人模型表面的油脂或沥青等污垢。在使用过程中要注意避开塑料、橡胶等部件，因为有机清洗剂含有汽油或煤油等成分，会腐蚀塑料和橡胶。
Robot model cleaning products can be divided into water-based cleaning agents, organic cleaning agents, grease cleaning agents, dissolution cleaning agents and multi-functional cleaning agents according to different functions. Organic cleaning agent organic cleaning agent is mainly used to remove dirt such as grease or asphalt on the surface of large robot model. In the process of use, pay attention to avoid plastic, rubber and other parts, because the organic cleaning agent contains gasoline or kerosene and will corrode the plastic and rubber.
同时在使用过程中也要注意避免在明火或火花附近使用有机清洗剂，要在通风良好的地方使用，防止其自燃引起火灾。水性清洗剂水性清洗剂主要用于水性污垢，具有较强的浸润和溶解能力，且呈中性，不仅能有效一般污垢，且对机器人模型漆面有保护光泽的作用。水性清洗剂根据表脏污程度不同，按的比例和水混合调配使用。
At the same time, in the process of use, it is also necessary to avoid using organic cleaning agents near open flames or sparks, and use them in well ventilated places to prevent spontaneous combustion and fire. Water based cleaning agent water based cleaning agent is mainly used for water-based dirt. It has strong wetting and dissolving ability and is neutral. It can not only effectively general dirt, but also protect the paint surface of robot model. The water-based cleaning agent can be mixed with water according to the degree of dirt on the surface.
When it is cold, sprinkle it on the table for 3-4 minutes to effectively dissolve the water-based dirt and then wash the body. It can not only easily remove the dirt but also make up the luster of the robot model paint. So what do you know about this? You can come to our website http://www.quanyimoxing.com Consult and understand!
