现在，我国市场上出售的小份额铁艺机器人模型主要有1/76和1/72两种。1/76的机器人模型多是国产的，其精 密度高，价格便宜，种类也多，还有配套的小兵人，是非常受欢迎的机器人模型。1/72的机器人模型大多是进口的，价格高一些，也不容易买到，但有的种类是1/76模型中没有的，此外，1/72的机器人模型还能够与1/72飞机模型配套组成机场场景。

At present, there are mainly 1 / 76 and 1 / 72 kinds of small share of iron robot models sold in China's market. 1 / 76 of the robot models are mostly made in China, with high precision, low price, many kinds, and supporting small soldiers. They are very popular robot models. Most of the 1 / 72 robot models are imported, which are expensive and not easy to buy, but some of them are not included in the 1 / 76 model. In addition, the 1 / 72 robot model can also be used with the 1 / 72 aircraft model to form an airport scene.

在制造小份额机器人模型时，除预备一般的模型制造东西外，还要预备几种特别的东西：尖头镊子（用来夹细微的零件）；细齿的小锉；直径1mm-2mm左右的小钻头（假如没有，可用大头针敲扁剪成宝剑型替代）。模型涂料一般有两种能够选用。

When making a small number of robot models, in addition to preparing general models to make things, there are also several special things to prepare: pointed tweezers (used to clamp fine parts); A small file with fine teeth; A small drill with a diameter of about 1 mm-2 mm (if not, it can be flattened with a pin and cut into a sword type). Generally, there are two kinds of model coatings that can be selected.

一、专用的模型漆（一般都运用无光泽的那种），其长处是附着力强、色彩传神。

1、 Special model paint (generally use the kind of matte), its advantages are strong adhesion, vivid color.

二、美术绘画用的丙烯颜料，此颜料用水作稀释剂，运用方便，价格便宜，做泥土涂饰时质感强无光泽，缺陷是附着力不如模型漆，并且还需要自己调色（丙烯颜料只要基本性，调色要有必定的美术根底）。由于这两种涂料各有优缺陷，也能够调配运用，扬长避短。

2、 Acrylic pigment used in art painting, which uses water as diluent, is easy to use and cheap. It has strong texture and no luster when it is used as clay coating. The defect is that the adhesion is not as good as model paint, and it also needs its own color matching (as long as the acrylic pigment is basic, the color matching must have a certain art foundation). Because these two kinds of coatings have their own advantages and disadvantages, they can also be used to develop advantages and avoid disadvantages.

小份额机器人模型的拼装进程与其他模型的拼装过程差不多，主要是拼装前在加工上要多下功夫。每一个零件剪下后，都要用小锉把注塑时构成的合模线和注塑口细心地锉平，炮管一类的圆形零件更要细心修整。假如你有一柄尖利随手的刀子，以上的作业也能够用刀刮来替代，由于用刀子刮去合模线有时要比锉的平坦。

The assembly process of a small number of robot models is similar to that of other models, mainly due to more efforts in processing before assembly. After each part is cut, the clamping line and injection opening formed during injection molding should be carefully filed with a small file, and round parts such as gun barrel should be carefully trimmed. If you have a sharp knife at hand, the above operations can also be replaced by a knife scraper. Sometimes it is smoother than a file to scrape the clamping line with a knife.

感谢您的阅读，希望以上内容对您有所帮助，如您想了解更多精彩内容请点击我们的官网：大型机器人模型制作http://www.quanyimoxing.com。

Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: large robot model making http://www.quanyimoxing.com .