大型军事模型是如今很多军事迷们会参与制作的项目，制作安装完成后有时会在某个地方展示出来，供大家欣赏，但其中要注意的事项还是比较多的，那么大型军事模型在展示时切忌做什么事？

　　Large military model is now a lot of military fans will participate in the production of the project, the production and installation of the completion of the sometimes displayed in a place for everyone to enjoy, but there are more matters to pay attention to, so large military model in the display of what should not do?

　　由于各种原因，一些展示空间有很多灰尘，应采取适当的屏蔽措施，减少灰尘落入大型军事模型内部，灰尘对模型的影响主要是加速模型老化，影响展示效果。而且，整体清洗会对模型造成不同程度的损坏，从而导致模型受到不同程度的损坏，清洁次数越多，模型中许多组件的损坏就越大，要注意清洁的力度。此外，在展览期间，许多孩子不可避免地会和父母一起来，孩子们对模型上的小部件很感兴趣，在展示过程中要适当的提醒，以免孩子对模型造成伤害。

　　Due to various reasons, there is a lot of dust in some exhibition Spaces, and appropriate shielding measures should be taken to reduce dust falling into the interior of large military models. The influence of dust on models is mainly to accelerate the aging of models and affect the display effect. In addition, the overall cleaning will cause different degrees of damage to the model, resulting in different degrees of damage to the model. The more cleaning times, the greater the damage of many components in the model. Attention should be paid to the cleaning strength. In addition, during the exhibition, many children will inevitably come with their parents. Children are interested in the small parts on the model, and proper reminders should be given during the display to avoid children causing harm to the model.

　　同样重要的是展示空间的温度和湿度不能太高，因为大型军事模型内部有很多微小的电子元件，运行时会散发出一些热量。但由于内部空间小，有的灯泡只有几毫米左右，会造成热量过分集中，会造成材料变形或焊点脱落。室内湿度不宜过高，使模型内部的电子元件工作在潮湿的环境中，会大大降低电子元件的使用寿命。

　　It was also important that the temperature and humidity of the display space not be too high, because large military models have lots of tiny electronics inside them that emit some heat as they run. But because the internal space is small, some bulbs only a few millimeters or so, will cause excessive heat concentration, will cause material deformation or solder spot fall off. Indoor humidity should not be too high, so that the electronic components inside the model work in a humid environment, will greatly reduce the service life of electronic components.

　　此外，大型军事模型内部电路及微电子元件较多，禁止在模型上形成流水。如果茶杯或饮料溢出，应立即用干毛巾或纸巾堵住水流，以防止面积扩大。或者深入模型的底盘，防止内部电子元件被烧毁或电线因进水而短路。如果模型上有大量水，应立即断开电源。如果有大量水渗入或雨水，请等待模型完全干燥后再连接电源。

　　In addition, the large military model has many internal circuits and micro-electronic components, so it is forbidden to form water on the model. If a teacup or drink spills, stop the water with a dry towel or paper towel immediately to prevent the area from expanding. Or go deep into the chassis of the model to prevent the internal electronics from burning out or the wiring from being short-circuited by water. If there is a lot of water on the model, the power should be disconnected immediately. If there is a lot of water infiltration or rain, wait until the model is completely dry before connecting the power supply.

　　大型军事模型说实在的话，它的制作过程是比较繁琐且复杂的，所以完成后需要对其进行好好的维护才行，这样才能让模型的使用寿命得到延长，那么如果您还有什么问题的话就来网站www.quanyimoxing.com进行咨询吧！

　　Large military model to be honest, its production process is quite tedious and complex, so it needs to be well maintained after completion, so that the service life of the model can be extended, so if you have any questions, please come to the website www.quanyimoxing.com for consultation!