一、保存放置
1、 Save Placement
禁悬空放置：放置于儿童不容易接触到的地方，以免小朋友不小心掉落汽车模型，不但是车模损坏更有可能会伤害到小朋友。
Prohibited suspension placement: Place in a place that is not easily accessible to children to prevent them from accidentally dropping the car model. Not only is the car model damaged, but it is more likely to harm children.
禁高温照射：不要长期暴露在阳光或高射灯下直射，容易造成车漆车轮和塑料配件老化、变形、皱裂，橡胶车胎容易氧化，产生热溶解。
Prohibit high temperature exposure: Do not expose to direct sunlight or high beam headlights for a long time, as it can easily cause aging, deformation, and cracking of painted wheels and plastic parts. Rubber tires are prone to oxidation and thermal dissolution.
忌潮湿环境：如果锌合金汽车模型长期放在较为潮湿的地方，车身的合金就会容易氧化，起黑点、漆面起泡等现象，所以尽量保持放置放置环境的干燥。
Avoid damp environments: If a zinc alloy car model is left in a relatively damp place for a long time, the alloy of the body will be prone to oxidation, black spots, paint bubbles, and other phenomena. Therefore, try to keep the storage environment dry as much as possible.
轮胎悬空放置：不同汽车模型厂家出产的模型重量都不尽相同。对于较重且需要长期放置的车模使用有机玻璃或小木块把车轮垫高，避免轮胎变成“八字脚”或粘连在底座上。
Tire suspension placement: Different car model manufacturers produce models with varying weights. For heavier models that require long-term placement, it is best to use organic glass or small wooden blocks to raise the wheels to avoid the tires becoming "splayed" or sticking to the base.
留下包装盒：这不但影响模型的观赏度，更重要它会直接影响汽车模型收藏的价值和再次出售的价格。
Leave the packaging box: This not only affects the viewing quality of the model, but more importantly, it directly affects the value of the car model collection and the resale price.
二、鉴赏把玩
2、 Appreciation and play
切勿用力过猛：高仿真汽车模型都是许多零件组装的，有些零件特别细小，所以一定做到防摔、防震、防压，动手时候要小心仔细，切勿用力过猛。造成零部件损坏
Do not use excessive force: High simulation car models are assembled with many parts, some of which are particularly small, so it is necessary to be anti drop, shockproof, and anti pressure. Be careful and do not use excessive force when handling. Causing component damage
开门器：如果一时找不到开门器，可以使用明信片或者有一定硬度的塑料薄片代替。因为长期使用双手打开车门对车身油漆损坏很大，甚至可能会拉坏车门。
Professional door opener: If you cannot find a professional door opener at the moment, you can use a postcard or a plastic sheet with a certain hardness to replace it. Because long-term use of both hands to open the car door can cause significant damage to the body paint, and may even damage the door.
三、保养维护
3、 Maintenance
清除灰尘：定期使用用软毛刷掸灰、吹风机等工具对车模表面的灰尘进行擦拭。
Dust removal: Regularly use tools such as a soft bristle brush or hair dryer to wipe the dust on the surface of the car model.
漆面打蜡：合金汽车模型一般放置二到三个月后就需要使用车蜡或碧丽珠擦洗车面防锈。但需要注意的是每次打蜡要薄、匀，少。蜡多了就容易嵌进车模的缝隙里。
Paint Waxing: Alloy car models generally require the use of car wax or Bilizhu to clean the surface for rust prevention after two to three months of storage. But it should be noted that each wax application should be thin, uniform, and minimal. Too much wax can easily fit into the gaps in the car model.
