作为军事模型的
大型坦克模型在进行了一段时间的使用之后需要进行相应的保养，否则无法保证其质量，很有可能在出售的时候存在问题，下面来详细讲解一番吧。
The large tank model, as a military model, needs to be maintained after it has been used for a period of time. Otherwise, its quality cannot be guaranteed. It is likely to have problems when it is sold. Let's explain it in detail.
1、保存位置
1. Save location
禁止悬挂放置：放置在儿童不易接触的地方，防止儿童不慎从车模上摔下来。不仅坦克模型损坏，更容易伤害儿童。
Prohibit hanging and placing: place it in a place where children are not easy to touch to prevent children from falling off the vehicle model accidentally. Not only the tank model is damaged, but also children are more likely to be injured.
无高温曝晒：不要长时间暴露在阳光直射或高空灯下，容易造成涂漆车轮和塑料件的老化、变形和起皱，橡胶轮胎容易氧化并产生热溶解。
No high temperature exposure: Do not expose to direct sunlight or overhead lights for a long time, which is easy to cause aging, deformation and wrinkling of painted wheels and plastic parts, and rubber tires are easy to oxidize and produce heat dissolution.
避免潮湿环境：如果坦克模型长时间放置在潮湿的地方，车身的合金会容易氧化、黑斑、油漆起泡等现象，因此尽量保持放置环境干燥。
Avoid wet environment: if the tank model is placed in a wet place for a long time, the alloy of the car body will be prone to oxidation, black spots, paint bubbles and other phenomena, so try to keep the storage environment dry.
轮胎悬挂位置：不同坦克模型厂家生产的坦克模型重量不同。
Tyre suspension position: tank models produced by different tank model manufacturers have different weights.
离开包装箱：这不仅影响坦克模型的观赏度，还直接影响坦克模型的收藏价值和转售。
Leaving the packing box: this not only affects the viewing degree of the tank model, but also directly affects the collection value and resale price of the tank model.
2、欣赏和玩耍
2. Appreciation and play
不要用太大的力：高仿真的坦克模型是由许多零件组装而成的，有些零件非常小，所以一定要防止坠落、防震和受压。我们做这件事时要小心，不要用太大的力气。零件损坏
Don't use too much force: the highly simulated tank model is composed of many parts, some of which are very small, so we must prevent falling, shock and pressure. We should be careful not to use too much force when doing this. Parts damaged
专门开门器：如果目前找不到专门的开门器，可以用明信片或具有一定硬度的塑料片来代替。因为长期用手打开车门会对车身油漆造成很大的损坏，甚可能损坏车门。
Special door opener: If no special door opener can be found at present, it can be replaced by postcards or plastic sheets with certain hardness. Because opening the door by hand for a long time will cause great damage to the body paint, and may even damage the door.
3、维护
3. Maintenance
除尘：定期用软刷、吹风机等工具擦拭坦克模型表面的灰尘。
Dust removal: regularly wipe the dust on the surface of the tank model with soft brush, hair dryer and other tools.
油漆打蜡：合金坦克模型一般需要用车蜡或碧珠擦拭洗车面进行防锈处理两到三个月后。但要注意的是，每一次打蜡都要薄、均匀、少。如果蜡太多，很容易嵌入到坦克模型的缝隙中。
Paint waxing: alloy tank models generally need to be cleaned with car wax or green beads for rust prevention treatment after two to three months. However, it should be noted that each wax should be thin, uniform and less. If there is too much wax, it can easily be embedded into the gap of the tank model.
The above three aspects analyze the maintenance of large tank models. This will prolong the life of tank models. Come to our website for more relevant matters http://www.quanyimoxing.com Ask!
