在玩坦克装甲车辆模型的发烧友中,有很多人喜欢制作小比例的模型,因为小比例的坦克装甲车辆模型(以下简称坦克模型)体积小,便于大量收藏。下面大型坦克模型厂家来讲讲
小比例坦克模型的组装过程参考操作。
Among enthusiasts who play with tank and armored vehicle models, many people like to make small scale models, because small scale tank and armored vehicle models (hereinafter referred to as tank models) are small in size and easy to collect in large quantities. Next, large tank model manufacturers will talk about the reference operation of the assembly process of small scale tank models.
小比例坦克模型的组装过程与其他模型的组装步骤差不多,主要是组装前在加工上要多下功夫。每一个零件剪下后,都要用小锉把注塑时形成的合模线和注塑口仔细地锉平,炮管一类的圆形零件更要仔细修整。
The assembly process of small scale tank models is similar to that of other models, mainly due to more efforts in processing before assembly. After each part is cut, the clamping line and injection opening formed during injection molding shall be carefully filed with a small file. Round parts such as gun barrel shall be carefully trimmed.
如果你有一柄锋利顺手的刀子,以上的工作也可以用刀刮来代替,因为用刀子刮去合模线有时要比锉的平整。小比例坦克模型的车轮(也包括汽车的轮子)上的合模线和注塑口一定要修理干净,因为模型的比例小,一丁点儿的多余物都会影响模型的组装效果。
If you have a sharp and handy knife, the above work can also be replaced by scraping with a knife, because scraping the clamping line with a knife is sometimes smoother than filing. The clamping line and injection opening on the wheels of the small scale tank model (including the wheels of the car) must be repaired clean, because the scale of the model is small, and a little bit of excess will affect the assembly effect of the model.
模型粘合时好用一根针来涂抹胶水,胶水要涂抹在两个接合面中面积小的一面上,这样粘合后就不会有多余的胶水挤出而破坏模型的表面了。模型粘合后挤出的胶水,干燥后要处理干净,以免影响美观。
It is better to use a needle to apply glue when bonding the model. The glue should be applied on the small side of the two joint surfaces, so that no excess glue will extrude and damage the surface of the model after bonding. The glue extruded from the model after bonding shall be cleaned after drying to avoid affecting the appearance.
小比例坦克模型的履带,一般都是橡胶制成的,组装时为美观起见,履带的接头好留在上面,这样接口在翼子板的遮挡下不明显。橡胶履带因有弹性,坦克模型往往不能紧贴地面而失去重量感,故可在车体内加一点配重,以解决这个问题。
Tracks of small scale tank models are generally made of rubber. For the sake of aesthetics, the joints of the tracks should be left on them, so that the interfaces are not obvious under the shielding of the fender. Because the rubber track is elastic, the tank model often cannot cling to the ground and lose the sense of weight. Therefore, a little counterweight can be added to the vehicle body to solve this problem.
In a word, making small scale tank and armored vehicle models requires patience and care. As long as you work hard, you can make beautiful models. If you are interested in large tank models or have customization needs, please come to our website http://www.quanyimoxing.com Consult!