您好,欢迎光临济南泉谊机械科技有限公司网站!

服务热线

李经理13695310799
热门搜索:军事模型 航天模型 飞机模型 坦克模型 变形金刚模型 钢雕模型
您当前所在位置 首页>>新闻动态>>常见问题飞机模型要想长久使用就要做好一些事

飞机模型要想长久使用就要做好一些事

发布时间:2022-09-24 来源:http://www.quanyimoxing.com/

大型飞机模型厂家建议,您要想让自家的飞机模型长久的使用,并无损坏等问题的使用,就要做好一些事项,包含模型的保存以及维护方法,下面厂家为您介绍下吧。
The manufacturer of large aircraft model suggests that if you want to use your own aircraft model for a long time without damage and other problems, you should do a good job, including the preservation and maintenance methods of the model. The manufacturer will introduce it to you below.
一、保存放置
1、 Save Placement
禁悬空放置:放置于儿童不容易接触到的地方,以免小朋友不小心掉落模型,不但是模型损坏更有可能会伤害到小朋友。
It is forbidden to place it in the air: it should be placed in a place not easily accessible to children to prevent children from accidentally dropping the model. Not only is the model damaged, it is more likely to hurt children.
禁高温照射:不要长期暴露在阳光或高射灯下直射,容易造成漆面和塑料配件老化、变形、皱裂。
No high temperature exposure: Do not expose to direct sunlight or high light for a long time, which may cause aging, deformation and cracking of paint and plastic accessories.
忌潮湿环境:如果锌合金模型长期放在较为潮湿的地方,模型表面的合金就会容易氧化,起黑点、漆面起泡等现象,所以尽量保持放置放置环境的干燥。
Avoid wet environment: If the zinc alloy model is placed in a damp place for a long time, the alloy on the surface of the model will be easy to oxidize, black spots, paint blisters, etc., so try to keep the environment dry.
留下包装盒:这不但影响模型的观赏度,更重要它会直接影响汽车模型收藏的价值和再次出售的价格。
Leave the packing box: this not only affects the viewing degree of the model, but also directly affects the value of the car model collection and the resale price.
大型飞机模型
二、鉴赏把玩
2、 Appreciate and play
切勿用力过猛:高仿真模型都是许多零件组装的,有些零件特别细小,所以一定做到防摔、防震、防压,动手时候要小心仔细,切勿用力过猛造成零部件损坏。
Do not use too much force: the high simulation model is assembled by many parts, and some parts are very small, so you must be anti falling, shockproof and anti pressure. Be careful when you use your hands, and do not use too much force to damage parts.
三、保养维护
3、 Maintenance
清理灰尘:定期使用用软毛刷掸灰、吹风机等工具对模型表面的灰尘进行擦拭。
Dust cleaning: regularly use soft brush, hair dryer and other tools to wipe the dust on the surface of the model.
漆面打蜡:合金模型一般放置二到三个月后就需要使用蜡或碧丽珠擦洗表面防锈。但需要注意的是每次打蜡要薄、匀、少。蜡多了就容易嵌进模型的缝隙里。
Paint waxing: After the alloy model is generally placed for two to three months, it is necessary to use wax or Brilliant beads to scrub the surface for rust prevention. However, it should be noted that each waxing should be thin, even and less. Too much wax is easily embedded in the gaps of the model.
飞机模型要想长久使用就要做好一些事就讲解到这里了,您如果有什么问题急需解答就来我们网站http://www.quanyimoxing.com咨询吧!
If you want to use the aircraft model for a long time, you need to do something well. That's all. If you have any questions that you need to answer, please come to our website http://www.quanyimoxing.com Consult!
-